SJ single screw two stage granulation extruder
1.What dose the machine do?
The machine could help you to recycle the rigid plastic likes CPP, HDPE flakes, PP flakes etc.The end products is the regular plastic pellets.
The material either from post industrial material or post customer material. Note please: depends on the material condition, the material should be washed or not washed.
2.Dose the machine need large space?
The machine is small with no much space in factory. It contains one conveyor with or without metal detector, cutter compactor, extruder, degassing, pelletizing, water chute, vibration, and cenntrifugal dewatering, wind transmission and packing.
3.How dose the machine work?
The machine work like these:
One person put the raw material into the screw charger. The screw charger convey the material into the extruder feeder. The extruder is with degassing and filter, each with the ability to remove the ink and impurities. After the raw material go out the extruder die head, there is the watering pelletizing or strand pelletizing. It will cut the material into the small regular pellets. Then the cutted pellets go to the centrifugal dewatering to dewater and then go to the vibration and wind tranmission channel for the next step packing.
4.Do your machine will work well on our material?
Specialised in the plastic recycling machine for more than 10 years, we have exported machine to all over the world. We have aboundant experience in the solving the plastic recycling problem. You could bring your material to our factory to test or you could visit our factory to test the machine.
5. Will the machine be reliable?
All the machine passed the CE certificate. We will list the machine material in the quotation for you check. The motor is SIEMENS BEIDE, temperature control OMRON, SIMENS frequency controlling etc.
6. How to solve the problem when the machine go wrong
As per customer request, we offer engineering to assist install machine in customer factory. And we will offer training and maintance tecniques. Main machine guanrantee is one year except the wearing parts. is Once any problem on machine running, we will offer first reponse.
7. How is the payment item?
We accept 30% T/T payment in advance, and 70% payment T/T before shipping.
8. How to accept the machine?
Once the machine finish, customer go to our factory to check and test the machine. We will offer the test material. Once satisfy, customer pay the rest money.
9. Application:
The machine is used in the rigid material extrusion, the material bulk density is 0.1-0.3 g/l. Such as PE, PP, PS, PVC, ABS, PA, PC, PET etc. The machine is suitable for the material with high impurity rate, high moisture content and high output. At the same time it is equipped with the forced feeder.
10.Mode of Cutting:
Strand pelletizing
Water-ring rubs surface pelletizing
Wind-cooling rubs surface pelletizing
Underwater pelletizing
11. Model:
| Model |
SJ 30 |
SJ 45 |
SJ 65 |
SJ 90 |
SJ 100 |
SJ 120 |
SJ 150 |
SJ 160 |
SJ 180 |
SJ 200 |
| Screw diameter(mm) |
30 |
45 |
65 |
90 |
100 |
120 |
150 |
160 |
180 |
200 |
| L/D |
18-24 |
18-24 |
18-24 |
18-24 |
18-24 |
18-24 |
18-24 |
18-24 |
18-24 |
18-24 |
| Screw Rotary Speed(R/min) |
10-150 |
10-150 |
10-150 |
10-150 |
10-150 |
10-150 |
10-150 |
10-150 |
10-150 |
10-150 |
| Output(KG/H) |
2-40 |
10-60 |
100-150 |
150-250 |
250-350 |
300-600 |
400-750 |
800-1000 |
1500-2000 |
2000-3000 |
